Mô phỏng tính toán độ thấm của bê tông sợi thép có tính đến ảnh hưởng của tải trọng
                    Email:
                    phamductho@humg.edu.vn
                
                                                    
                        
				
					                    Từ khóa:
				
                            
					                                                    Mô hình lưới; độ thấm; cơ học phá hủy, bê tông sợi thép.                                            				
                        
                    
                
                                                    Tóm tắt
Nghiên cứu này sử dụng mô hình lưới (lattice model) để mô phỏng sự hình thành và phát triển các vi khe nứt và ảnh hưởng của nó đến hệ số thấm của cấu kiện bê tông tăng cường sợi thép (FRC). Trong mô hình này, bê tông được xem là bão hòa nước và bỏ qua ảnh hưởng của hiện tượng mao dẫn. Luật ứng xử kết hợp cơ-thủy được phát triển dựa trên mô hình cơ học phá hủy Mazars với sự tăng độ thấm của bê tông là 1 hàm lập phương của độ mở rộng vết nứt. So sánh kết quả mô phỏng với thực nghiệm cho thấy mô hình đề xuất là 1 công cụ hữu hiệu cho phép đánh giá độ mở rộng vết nứt và ảnh hưởng của nó đến sự thay đổi hệ số thấm của bê tông sợi thép, có vai trò quan trọng trong việc phân tích độ bền của các kết cấu bê tông cốt sợi thép.Tài liệu tham khảo
                                                            [1]. Benoît Bary, Jean-Pierre Bournazel, Eric Bourdarot, Poro-Damage Approach Applied to Hydro-Fracture Analysis of Concrete, J. Eng. Mech., 126 (2000) 937–943. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:9(937)
[2]. J.E. Bolander, S. Saito, Fracture analyses using spring networks with random geometry. Eng. Fract. Mech., 61 (1998) 569–591.
[3]. G. Chatzigeorgiou, V. Picandet, A. Khelidj, G. Pijaudier-Cabot, Coupling between progressive damage and permeability of concrete: analysis with a discrete model, Int. J. Numer. Anal. Methods Geomech., 29 (2005) 1005–1018. https://doi.org/10.1002/nag.445
[4]. O. Coussy, Mechanics of Porous Continua, Wiley Interscience, New York, 1995.
[5]. C. Desmettre, J.-P, Charron, Water permeability of reinforced concrete with and without fiber subjected to static and constant tensile loading, Cem. Concr. Res., 42 (2012) 945–952. https://doi.org/10.1016/j.cemconres.2012.03.014
[6]. C. Desmettre, J.-P, Charron, Novel water permeability device for reinforced concrete under load, Mater. Struct., 44 (2011) 1713–1723. https://doi.org/10.1617/s11527-011-9729-6
[7]. P. Grassl, A new lattice approach to model diffusion in fractured media, Cement and Concrete Composites, 33 (2009) 918-924.
[8]. Jan Kozicki, Jacek Tejchman, 2D lattice model for fracture in brittle materials, Hydro-Eng. Environ. Mech., 53 (2006) 137-154.
[9]. E. Schlangen, J.G.M. van Mier, Simple lattice model for numerical simulation of fracture of concrete materials and structures, Mater. Struct., 25 (1992) 534–542. https://doi.org/10.1007/BF02472449
[10]. G. Voronoi, Nouvelles applications des paramètres continus à la théorie des formes quadratiques. Deuxième mémoire. Recherches sur les parallélloèdres primitifs, Journal für die reine und angewandte Mathematik, 1908 (2009) 198-287. https://doi.org/10.1515/crll.1908.134.198
                                                    
                    [2]. J.E. Bolander, S. Saito, Fracture analyses using spring networks with random geometry. Eng. Fract. Mech., 61 (1998) 569–591.
[3]. G. Chatzigeorgiou, V. Picandet, A. Khelidj, G. Pijaudier-Cabot, Coupling between progressive damage and permeability of concrete: analysis with a discrete model, Int. J. Numer. Anal. Methods Geomech., 29 (2005) 1005–1018. https://doi.org/10.1002/nag.445
[4]. O. Coussy, Mechanics of Porous Continua, Wiley Interscience, New York, 1995.
[5]. C. Desmettre, J.-P, Charron, Water permeability of reinforced concrete with and without fiber subjected to static and constant tensile loading, Cem. Concr. Res., 42 (2012) 945–952. https://doi.org/10.1016/j.cemconres.2012.03.014
[6]. C. Desmettre, J.-P, Charron, Novel water permeability device for reinforced concrete under load, Mater. Struct., 44 (2011) 1713–1723. https://doi.org/10.1617/s11527-011-9729-6
[7]. P. Grassl, A new lattice approach to model diffusion in fractured media, Cement and Concrete Composites, 33 (2009) 918-924.
[8]. Jan Kozicki, Jacek Tejchman, 2D lattice model for fracture in brittle materials, Hydro-Eng. Environ. Mech., 53 (2006) 137-154.
[9]. E. Schlangen, J.G.M. van Mier, Simple lattice model for numerical simulation of fracture of concrete materials and structures, Mater. Struct., 25 (1992) 534–542. https://doi.org/10.1007/BF02472449
[10]. G. Voronoi, Nouvelles applications des paramètres continus à la théorie des formes quadratiques. Deuxième mémoire. Recherches sur les parallélloèdres primitifs, Journal für die reine und angewandte Mathematik, 1908 (2009) 198-287. https://doi.org/10.1515/crll.1908.134.198
Tải xuống
			Chưa có dữ liệu thống kê
		
	
                
            Nhận bài
        
        
                            17/01/2019
                    
    
            Nhận bài sửa
        
        
                            20/06/2019
                    
    
            Chấp nhận đăng
        
        
                            28/06/2019
                    
    
            Xuất bản
        
        
                            16/09/2019
                    
    
            Chuyên mục
        
        
                            Công trình khoa học
                    
    
            Kiểu trích dẫn
        
        Phạm Đức, T., Trần Thế, T., Bùi Anh, T., & Hồ Xuân, B. (1568566800). Mô phỏng tính toán độ thấm của bê tông sợi thép có tính đến ảnh hưởng của tải trọng . Tạp Chí Khoa Học Giao Thông Vận Tải, 70(1), 63-72. https://doi.org/10.25073/tcsj.70.1.44
            Số lần xem tóm tắt
        
        
                            181
                    
    
            Số lần xem bài báo
        
        
                            229
                    
    
                    
                




